Brian May Red Special Guitar Neck Full CNC Cut Video

I recently revised my Brian May Red Special guitar neck design to correct some original sin errors and incorporate a significant number of improvements (‘kaizen’), most notably to the thickness of the mahogany in the main section and the headstock. I also reinterpreted the region where the headstock lozenge shape meets the elliptical profile of the main section to improve the fidelity. Having improved my TurboCAD techniques in the five years or so since I began this project, I also took the opportunity to simplify the methods I use to design each part of the neck (tenon, main section and headstock) to achieve a better result.

I sourced more mahogany timber (from Manuel Angelini in France), prepared it using my Makita table saw and CNC cut the neck over several sessions in August 2021, over four years since I made my original neck. I recorded highlights of each session in full HD, 60 fps, speeded up the sequences and mixed them into a 13 minute long YouTube video illustrating each stage of the process. This is embedded below; further details are available in the YouTube description with time indexed titles.

I took every opportunity to improve the cutting and drilling processes including CNC cutting two large 2 degree and 4 degree wedges for drilling machine heads holes in the headstock and fixing screw and bolt holes in the tenon. I also made an extended bed for my mini drill press from 19 mm plywood to accommodate them. To maintain precise axial alignment for both the upper and lower side toolpaths, I fitted a “L”-shaped alignment bracket water-jet custom cut from 20 mm thick aluminium to the T-slot machine table. Credit to Jon Underhill for providing this. This was the first cut in which I deployed direct dust extraction by means of a Delta dust shoe and Dyson DC39 Animal vacuum cleaner.

To make subsequent assembly easier, I CNC cut a slot for the brass plate which the truss rod tensioner bolt butts up against and corrected the position of the rebate which accommodates it. I also drilled six dowel locating holes to mount a perspex template which I will use to align the fretboard precisely to the the mahogany.